Features TIGER T55:
• Processor: ALI 3601
• Flash memory: EON 8MB
• DDR2 RAM memory: 128MB
• Tuner: Sharp 7306
• Standards support: SD/HD (MPEG2/MPEG4 H.264), DVB-S, DVB-S2
• DiSEqC control - 1.0; 1.1; 1,2/USALS
• PVR - for configuration and recording/playback
• Memory up to 10,000 channels (TV and radio)
• Multi-language menu
• Fast switching between channels
• Easy to create their lists of favorite channels
• Electronic Programme Guide - EPG
• Support for subtitles on the screen
• The "Protection of children»
• Software update via USB and RS-232
• Recording and playback of video (when connected to USB-disk)
• Supported formats playable files: JPG, BMP, MP3, WMA, AVI, MKV
Connectors on the Tiger * T55 FULL HD CA PVR:
CA - kartreader
Interface USB 2.0 (PVR) (WiFI)
HDMI - digital HD-video/audio output
Digital audio connector S/PDIF
TV/VCR SCART - connect analog TV
LNB IF input - input satellite dish
RS 232 - connection to PC COM-port
Features TIGER T66:
Processor: ALI 3606
Flash Memory: EON 8MB
DDR2 RAM memory: 128MB
Tuner: Sharp 7306
Standards support: SD/HD (MPEG2/MPEG4 H.264), DVB-S, DVB-S2
DiSEqC Control - 1.0; 1.1; 1,2/USALS
PVR - for configuration and recording/playback
Support for Wi-Fi
Memory up to 10,000 channels (TV and radio)
Fast switching between channels
Easy to create their lists of favorite channels
Electronic Programme Guide - EPG
Support for subtitles on the screen
The "Protection of children»
Firmware upgradeable via USB and RS-232
Video recording and playback (when connected to USB-disk)
Support files playable formats: JPG, BMP, MP3, WMA, AVI, MKV
Warning! Despite the fact that the tuner looks the same, they have different processors, so the firmware for each model its own.
Update receiver TIGER T55/T66 by computer
1) Prepare a null modem cable (cable pinouts 2-3, 3-2, 5-5).
2) Connect the computer to the receiver via a null modem cable.
3) Turn on the receiver in the network, press the receiver button "POWER" and pereklyuchiteego Standby mode. LED on the receiver should flash.
4) On the computer, start ALI_RS232_LOADER utility menu, select , then click and select the firmware file with the extension * .bin,
press the button. After that, the software download process started in tuner.
5) After remaking tuner, LED display "-End". You can then disconnect the tuner from the network and the computer.
Warning !!! Do not disconnect the power or remove the USB flash drive during the upgrade process. This may cause damage to the device.
Activate the menu patch (emulator)
To open channels BISS coding, you must activate the menu patch (emulator). Standing on any channel you need to press F1 + 000
Then you can add the necessary keys with the remote. The editor is in the MENU -> Settings -> menu Patch .
Hot key combinations:
"F1" + "000": on \ off.. EMU
"F1" + "111": sharinga modes through RS232
"F1" + "555": the network settings (only for EthernetCSC mode)
"F1" + "666": Server Configuration (only for Ethernet CSC mode)
"F1" + "777": Get IP-address automatically