Receiver Sat-Integral S-1224 HD Stealth modern- settings, firmware, channel editors

Features Sat-Integral S-1224 HD Stealth modern:

Compact housing 128x80x25 mm
Modern high-performance dual-core processor Ali3511 (2h600 MHz)
Ultra-fast for HDTV-receiver channel switching
Multi card reader UniCAM
Simultaneous recording (two) and play (third) gear
USB 2.0 interface with support for WiFi / 3G adapters
RJ-45 Ethernet connector that supports network functions and applications
Support for multiple media formats
Supports FAT, FAT32 and NTFS USB-disk formats or USB-HDD
Excellent image quality with the release of HDMI
Output resolution: 480i, 480p, 576i, 576p, 720p_50Hz, 720p_60Hz, 1080i_50Hz, 1080i_60Hz, 1080P_24Hz, 1080P_25Hz, 1080P_50Hz, 1080P_60Hz
Digital coaxial audio output
RS-232 port for additional functions
Full support for DVB-S / DVB-S2 (MPEG-2 / MPEG-4 / H.264)
SCPC & MCPC reception with Ku / C band satellites
Managing pomoschyu.DiSEqC 1.0 / 1.1 / 1.2 / 1.3 (USALS), Auto DiSEqC
blind Search
multisatellite, network, hand, mnogotransponderny search.
Supports PAL / SECAM / NTSC
Memory: 100 satellite channels and 10,000
8 favorite groups
Parental Control
Support for multi language menu (Russian, Ukrainian, English, French, Greek, Italian, Arabic, Swedish, Spanish, Turkish, German, Hungarian)
Channel sorting by multiple parameters.
Convenient function group transfer channels, the history of return (RECALL)
The dual-mode program schedule for 7 days (EPG)
Software upgrades through USB / FTP / RS232.


firmware Description Date A new version of 2016.04.21 Warning! Roll back down is not possible! Read carefully the instructions in the archive! 2015.12.02 The new version of the software 2015.08.19 The new version of the software 2015.07.17 The new version of the software 2015.06.18
TRANSITION_UPGRADE Transit software version to upgrade to 3.47 and above 2015.06.02 The new version of the software 2015.06.02 Channel Editor 2014.04.08 boot loader 2015.12.30

Update receiver Sat-Integral S-1224 HD Stealth modern with USB-menu

1. Log in to the USB-menu and find the file with the software (data key)
2. Press OK and confirm software update
3. After the upgrade, reboot the receiver.
Warning !!! Do not disconnect the power or remove the USB flash drive during the upgrade process. This may cause damage to the device.

Activate the menu patch (emulator)

To open the channels encoded in BISS and other, you need to activate the menu patch (emulator). Standing on any channel you need to press F1 + 000

All combinations of buttons for Sat-Integral (Technosat):

F1 + 000: Emulator on /off
F1 + 111: Selecting UART
F1 + 222: Ident list with the possibility of manual binding
F1 + 333: Manual input constant CW
F1 + 444: Manual entry key
F1 + 147: Editing keys
F1 + 555: IP Settings
F1 + 666: Plants server
F1 + 777: Auto IP
F1 + 999: Motor settings

Receiver Sat Integral S-1224 HD Stealth modern- settings, firmware, channel editors

Add a comment to the topic:

Your name: 8231 + 11 =

See also :